ATS design, manufacture and commission Tube finishing lines to be installed downstream pipe and tube making lines, either seamless tube mills or EWR tube mills.
The main characteristics of ATS tube finishing lines are:
The TMP 1100 tying machine is able to tie square stacks up to 1100 x 1100 mm, it has been supplied complete with automation, motorized loop recover system for the re – insertion of the wire into the coil basket to avoid dangerous loops during wire trailing around the stack and portable control pluggable switchboard for local manual operations.
Installation and commissioning of the machine has been executed in less than one week under supervision of one ATS specialist.
Together with ATS Customer Oriented Service, the aim of the Customer was to install a “turn on and forget” tailor made system that was fitting with the advantages of ATS tying machines:
SGSQuality ManagementSystem certification
ACCREDIAItalian Accreditation System
ATS - Applicazioni Tecnologiche Siderurgiche S.p.A.
Via Chiavola, 10 - Zona Industriale | 33010 Trasaghis (Ud) | Italy
Tel. +39 0432 984185 | Fax +39 0432 984232
Cap. soc. € 500.000,00 i.v.
REA UD 198240
Reg. Impr. Udine 00162520308
Partita I.V.A 01824480303
Codice Fiscale 01824480303
Information on the treatment of personal data
With reference to the Law 196/03 which deals with protection of privacy, you are informed that the treatment of your personal data depends on the nature of your request. For this reason your data may even be managed by external subjects whose only function is operation of the system Online - management of the computerised and telematic information-. These functions are fundamental for the carrying out of your request. The owner of the data treatment is ATS. You may exercise your rights according to Art.13 of the Law 675/96 by contacting ATS - Applicazioni Tecnologiche Siderurgiche S.p.A. -Via Chiavola, 10 - Zona Industriale | 33010 Trasaghis (Ud) | Italy.
© ATS - Applicazioni Tecnologiche Siderurgiche S.p.A. All rights reserved